SolidForms · Filament

Two ways to print. Both tested and recommended by SolidForms.

Trusted by SolidForms
±0.02 mmTolerance
8Material lines
43Spools
Explore FG
Trusted by SolidForms
76Colours
4Material lines
±0.03 mmTolerance
Explore Patron

Filament ships at a flat rate and does not count toward the 1,500 EGP free-shipping threshold. Rates from 85 EGP depending on governorate.

FG Filament

The precision range

Held to ±0.02 mm across the spool — tighter than the industry standard, and why FG lands first time on fine detail, tight tolerances and functional parts. 8 lines: PLA+, PLA Meta, PLA Matte, Silk PLA+, PLA Marble, PETG, ABS and TPU.

PLA+Eco-friendly, easy to print, no harmful fumes — with added strength and a smoother finish.
PLA MetaModified for high-speed printing: higher flowability, tougher parts.
PLA MatteA luxurious matte finish engineered for aesthetics and printability.
Silk PLA+Silky, metallic sheen. Also in duo, tri and rainbow colour shifts.
PLA MarbleStone-effect swirl with a matte finish that hides layer lines.
PETGBalanced strength and thermal performance, water and UV resistant — built for outdoors.
ABSStrong, rigid and heat-tolerant. For functional prototypes, tools and jigs.
TPURubber-like flexibility and shock absorption for seals, covers and wearables.
OakPLA+ · 1.75 mm · 1 kg750 EGP
RedPLA+ · 1.75 mm · 1 kg750 EGP
Patron — strong, reliable, printable

76 colours, four lines

Every printing window below is taken straight off the spool label, not a datasheet. Tap a line to filter, or search by colour name.

RedPLA+ · 1.75 mm · 1 kg680 EGP

Which one should you load?

Reach for FG when the dimension matters — jigs, threads, press fits, fine miniatures. Reach for Patron when the colour matters and the part just needs to work.

LineToleranceNozzleBedWhat it’s for
FG — all 8 lines±0.02 mm Per linePer lineAccuracy-critical and functional work
Patron PLA+±0.03 mm190–220 °C45–60 °CEveryday printing with real impact strength. No warp, no drama.
Patron Matte±0.03 mm190–230 °C45–60 °CChalk-smooth, non-reflective. Hides layer lines on display pieces.
Patron PETG-HS±0.03 mm220–260 °C75–90 °CHigh-speed PETG. Tough, heat- and chemical-resistant.
Patron Marble±0.03 mm190–220 °C45–60 °CMineral flecks through the filament. Carved, not printed.

Not sure which spool?

Tell us what you’re printing and on which machine. We’ll tell you what to load — and what not to waste money on.

Browse FG Browse Patron